Adding NetFlow Exporters to a Network Discovery Policy

Before you begin

Configure the NetFlow exporters you plan to use as described in Netflow Data.
Review the other NetFlow prerequisites described in Requirements for Using NetFlow Data.

Step 1	Choose Policies > Network Discovery. In a multidomain deployment, if you are not in a leaf domain, the system prompts you to switch.
Step 2	Click Advanced.
Step 3	Click Add () next to NetFlow Devices.
Step 4	In the IP Address field, enter the IP address of the network device from which you want the managed device to collect NetFlow data.
Step 5	Optionally: Repeat the previous two steps to add additional NetFlow exporters. Remove a NetFlow exporter by clicking Delete (). Keep in mind that if you use a NetFlow exporter in a discovery rule, you must delete the rule before you can delete the device from the Advanced page.
Step 6	Click Save.

Configure a network discovery rule to monitor NetFlow traffic as described in Configuring Network Discovery Rules.
Deploy configuration changes; see Deploy Configuration Changes.