Set Target Devices for a FlexConfig Policy

When you create a FlexConfig policy, you can select the devices that use the policy. You can subsequently change device assignments for the policy as described below.

Note

Normally, when you unassign a policy from a device, the system automatically removes the associated configuration upon the next deployment. However, because FlexConfig objects are scripts for deploying customized commands, simply unassigning a FlexConfig policy from a device does not remove the commands that were configuring by the FlexConfig objects. If your intention is to remove FlexConfig-generated commands from a device's configuration, see Remove Features Configured Using FlexConfig.

Procedure

Step 1

Choose Devices > FlexConfig and edit a FlexConfig policy.

Step 2

Click Policy Assignments.

Step 3

On Targeted Devices, build your target list:

  • Add—Choose one or more Available Devices, then click Add to Policy or drag and drop into the list of Selected Devices. You can assign the policy to devices, high availability pairs, and clustered devices.
  • Delete—Click Delete (delete icon) next to a single device, or select multiple devices, right-click, then choose Delete Selection.
Step 4

Click OK to save your selection.

Step 5

Click Save to save the FlexConfig policy.

What to do next