Limitations for using SD-WAN wizard

The SD-WAN wizard has these limitations and restrictions:

  • You can configure a maximum of two hubs in an SD-WAN topology using the wizard.

  • For each spoke, you can use only one WAN interface per topology. However, for dual-ISP setups, you can configure a second SD-WAN topology with the second WAN interface. For more information, see Sample configurations for dual-ISP deployment using SD-WAN wizard.

  • SD-WAN wizard does not support the following:

    • IKEv1

    • Cluster devices are not supported on the hub and spoke because VTI is not supported on cluster devices.

    • Extranet hubs and spokes such as ASA, Cisco IOS, Cisco Viptela, Umbrella, Meraki, or vendor devices.​