Create a VLAN Interface for Switch Port Mode

Procedure

Step 1

In the navigation pane, click Security Devices.

Step 2

Click the Devices tab to locate the device or the Templates tab to locate the model device.

Step 3

Click the FTD tab and select the device you want to configure interfaces for.

Step 4

In the Management pane on the right, click Interfaces.

Step 5

On the Interfaces page, click the button and choose VLAN Interface.

Step 6

View the VLAN Members tab and select the desired physical interfaces.

Note	If you chose to add a member that references a VLAN interface configured for either Access or Native Trunk, you can only select one VLAN as a member. Physical interfaces that references a VLAN interface configured for Associated Trunk supports up to 20 interfaces as members.

Step 7

Configure the rest of the VLAN interface, as described in Configure a FDM-Managed Device VLAN.

Step 8

Click Save. Confirm that you want to reset the VLAN configuration and reassign an IP address to the interface.

Step 9

Review and deploynow the changes you made, or wait and deploy multiple changes at once.