Add Secure Client endpoint attributes to a DAP record

Add specific endpoint attributes to a Dynamic Access Policy (DAP) record to control client access based on Secure Client characteristics such as client version, platform, and device identifiers.

Procedure

Step 1

Choose Secure Connections > Dynamic Access Policy.

Step 2

Create or edit a DAP policy and a DAP record.

Step 3

Click the Endpoint Criteria tab and click Secure Client.

Step 4

Select the Match criteria as All or Any.

Step 5

Click + to add the attributes.

In the Secure Client dialog box, configure these parameters:

Select the = or ≠ operator to check the attribute to be equal to or not equal to the value you enter.

  1. Specify the Client Version.

  2. Choose the platform from the Platform drop-down list.

  3. Choose the platform version from the Platform Version drop-down list.

  4. Specify the Device Type and Device Unique ID.

  5. Add the MAC Addresses.

    Note

    The MAC Address must be in the format XX-XX-XX-XX-XX-XX, where each X is a hexadecimal character. You can click Add another MAC Address to add more addresses.

  6. Click Save.