Delete NetFlow Secure Event Logging (NSEL) Configuration from an Secure Firewall Cloud Native

This procedure explains how to DELETE the NetFlow Secure Event Logging (NSEL) Configuration on an Secure Firewall Cloud Native, which specifies the Secure Event Connector (SEC) as the NSEL flow collector. This procedure reverses the macro described in Configuring NSEL for ASA Devices Using a CDO Macro.

This procedure refers to this macro, DELETE NSEL:

policy-map {{flow_export_policy_name}} 
no class {{flow_export_class_name}} 
no class-map {{flow_export_class_name}} 
no flow-export destination {{interface}} {{IPv4_address}} {{NetFlow_port}} 
no flow-export template timeout-rate {{timeout_rate_in_mins}} 
no flow-export delay flow-create {{delay_flow_create_rate_in_secs}} 
no flow-export active refresh-interval {{refresh_interval_in_mins}} 
logging flow-export-syslogs enable 
show run flow-export 
show run policy-map {{flow_export_policy_name}} 
show run class-map {{flow_export_class_name}}