Enable VPN Within the Gateway
Use the following procedure to enable the VPN for a gateway in the Multicloud Defense Controller dashboard:
Before you begin
Before you can establish a VPN connection between two devices using Multicloud Defense, you must enable the gateway to utilize a BGP profile. See Prerequisites and Limitations for Site-to-Site VPN Tunnels for the complete list of pre-requisites for creating and deploying a gateway.
Note | If you opt to use a BGP profile, the BGP profile is run over the IPSEC tunnel with the remote peer. |
Procedure
Step 1 | Navigate to . |
Step 2 | Click Add Gateway to create a new gateway or select an existing gateway and choose to Edit it in the Actions drop-down menu. |
Step 3 | When you create or edit the gateway, scroll to the bottom of the window and select a BGP profile from the drop-down menu when prompted. |
Step 4 | Locate the VPN Connection options under Advanced Settings. Check the Enable VPN option to opt into VPN tunnel connection. |
Step 5 | Expand the BGP Profile drop-down menu and select a profile that has already been created. |