Read RA VPN Configuration of an Onboarded ASA Device
When you onboard an ASDM managed ASA device that already has RA VPN settings, it discovers and displays the existing remote access VPN configurations. CDO automatically creates a "Default RA VPN Configuration" and associates the ASA device with this configuration. There are some RA VPN configurations that aren't read or supported in the CDO but can be configured in the CDO command-line interface.
Note | This section doesn't cover every supported or unsupported configuration in CDO. Instead, it only describes the most commonly used ones. |
To see the RA VPN configurations from an onboarded ASA, perform the following steps:
Procedure
Step 1 | On the CDO interface, navigate to . |
Step 2 | Click the RA VPN configuration corresponding to the onboarded ASA device. CDO automatically creates a "Default_RA_VPN_Configuration" and associates the ASA device with this configuration. You can delete the default configuration. The ASA RA VPN configurations that are read in CDO are classified as follows:
|