Security Cloud Control Command Line Interface for ASA

Access the command line interface to configure ASA devices directly through Security Cloud Control.

For all the tasks in this procedure, you will be working on the Security Cloud Control's command line interface for ASA.

Procedure

Step 1

From the left navigation bar, click Security Devices.

Step 2

Click the Devices tab.

Step 3

Click the appropriate device type tab and select the ASA for which you want to enable logging.

Step 4

In the Device Actions pane on the right, click >_ Command Line Interface.

Step 5

Click the Command Line Interface tab.

After entering every command, you will click Send. Because Security Cloud Control's CLI Interface is a direct connection to the ASA, the command is written to the device's running configuration immediately. For changes to be written to the ASA's startup configuration, you need to issue the write memory command in addition.

You are now ready to enter commands at the command line interface prompt.