Create a user-defined application

Creating an application protocol detector to identify traffic that is not recognized by default system detectors. Applications, categories, and tags created here can be used in access control rules and application filters.

Caution

Creating a user-defined application immediately restarts the Snort process without going through the deploy process. The system warns that continuing will restart the Snort process on all managed devices and gives an option to cancel.Whether traffic drops during this interruption or passes without further inspection depends on how the assigned device handles traffic. Refer to Snort restart traffic behavior.

Caution

Creating a user-defined application immediately restarts the Snort process without going through the deploy process. The system warns that continuing will restart the Snort process and allows you to cancel; the restart occurs on any managed device in the current domain or in any of its child domains. Whether traffic drops during this interruption or passes without further inspection depends on how the assigned device handles traffic. Refer to Snort restart traffic behavior.

Before you begin

Begin configuring your custom application protocol detector as described in Configure custom application detectors.

Follow these steps to create a user-defined application:

Procedure


Step 1

On the Create A Custom Application Detector dialog box, click Add (add icon) next to the Application field.

Step 2

Type a Name.

Step 3

Type a Description.

Step 4

Select a Business Relevance.

Step 5

Select a Risk.

Step 6

Click Add next to Categories to add a category and type a new category name, or select an existing category from the Categories drop-down list.

Step 7

(Optional) Click Add next to Tags to add a tag and type a new tag name, or select an existing tag from the Tags drop-down list.

Step 8

Click OK.


The user-defined application is created and is ready to be configured as part of your custom application protocol detector.

What to do next

Continue configuring your custom application protocol detector as described in Configure custom application detectors. You must save and activate the detector before the system can use it to analyze traffic.