Specifying detection patterns in basic detectors
Configure a custom application protocol detector to search application protocol packet headers for a specific pattern string. You can also configure detectors to search for multiple patterns; requiring the application protocol traffic to match all patterns for positive identification.
Application protocol detectors can search for ASCII or hexadecimal patterns, using any offset.
Before you begin
Configure your custom application protocol detector as described in Configure custom application detectors.
Follow these steps to specify detection patterns in basic detectors:
Procedure
Step 1 | On the Create Detector page, in the Detection Patterns section, click Add. | ||
Step 2 | Choose protocol type from the Application drop-down list. | ||
Step 3 | Choose pattern type from the Type drop-down list. | ||
Step 4 | Type a Pattern string that matches the Type you specified. | ||
Step 5 | Optionally, type the Offset (in byte). | ||
Step 6 | Optionally, to identify application protocol traffic based on the port it uses, type a port from 1 to 65535 in the Port(s) field. To use multiple ports, separate them by commas. | ||
Step 7 | Click a Direction: Client or Server. | ||
Step 8 | Click OK.
|
The detection pattern is successfully added to your custom application protocol detector configuration.
What to do next
Continue configuring your custom application protocol detector as described in Configure custom application detectors. You must save and activate the detector before the system can use it to analyze traffic.
