Revert Overridden Configuration to Default Configuration
You can revert any changes that you made to override the default configuration for an inspector. This action reverts the overridden configuration to the default configuration for an inspector.
Procedure
Step 1 | Go to . |
Step 2 | Go to the Snort 3 Version of the network analysis policy. |
Step 3 | Under Inspectors, expand the required inspector for which you want to revert the overridden configuration. The overridden inspectors are shown with the orange icon next to their name. The default configuration is displayed on the left column and the overridden configuration is displayed on the right column under the inspector. Under the Overridden Configuration on the right column, click Revert to default configuration (back arrow) icon to revert the overridden configuration for the inspector to the default configuration. If you did not make any changes to the default configuration for the inspector, then this option is disabled. |
Step 4 | Click Revert to confirm the decision. |
Step 5 | Click Save to save the changes. If you do not want to save the changes, you can click Cancel or the Cross (X) icon. |