View Rules from Device Policy Page

The FDM-managed device policy page shows individual (local) and shared rules (associated with rulesets).

Use the following procedure to view the FDM-managed device ruleset from the policy page:

Procedure

Step 1

In the left pane, click Security Devices.

Step 2

Click the Devices tab to locate the device or the Templates tab to locate the model device.

Step 3

Click the FTD tab and select the device that you want.

Step 4

In the Management pane on the right, click Policy. You see the following rules based on the configuration you have made:

  • Top Rules: Shows the mandatory shared rules which will be processed before all other rules on the device.

  • Local Rules: Shows device-specific rules which will be processed after mandatory rules on the device.

  • Bottom: Shows the default shared rules which will be processed after all other rules on the device.

Note

You can edit the ruleset by going to the corresponding ruleset page.

  1. On the top right corner of the ruleset header, click Go to ruleset .

  2. Make the required changes to the rules and click Save. The new changes are updated on all devices associated with the ruleset.