Configure EIGRP neighbors settings

Define static neighbors for the EIGRP process. This results in unicast hello packets being sent to that neighbor.

Procedure

Step 1

On the EIGRP page, click the Neighbors tab.

Step 2

Click Add.

Step 3

Select the interface through which the neighbor is available, from the Interface drop-down list.

Step 4

Select the IP address of the static neighbor from the Neighbor drop-down list, and to add the network object, click Add (add icon). For instructions on adding network objects, refer to Network.

Step 5

Click OK and click Save to save the changes.

The EIGRP static neighbor is configured, and hello packets are sent as unicast to the specified neighbor through the designated interface.